Meet System And Software Requirements; Preparing The Workstation; Preparing The Source Server - Novell NETWARE 6-DOCUMENTATION Manual

Meet System and Software Requirements

Preparing the Workstation

Preparing the Source Server

22
NetWare Migration Wizard 6 Aministration Guide
To migrate data from NetWare 4, NetWare 5, or NetWare 6, complete the
following tasks in the order they are listed.
1. "Meet System and Software Requirements" on page 22
2. "Run Migration Wizard" on page 25
3. "Perform Post-Migration Tasks" on page 32
Make sure your workstation has the following:
A Windows 98 or Windows NT 4/2000 workstation with 50 MB of
available disk space.
The Windows 98 workstation must be running Novell Client
Windows 98 version 3.3 or later.
IMPORTANT:
workstations.
The Windows NT 4/2000 workstation must be running Novell Client
for Windows NT version 4.8 or later.
If migrating from NetWare 4, the IPX
your Novell Client workstation.
For better performance, it is strongly recommended that the source server,
destination server, and client workstation be running on a common LAN
segment.
The source server is the NetWare server that contains the files, volumes, and
NDS objects that will be copied to the NetWare destination server. Valid
source servers can be running NetWare 4.11, 4.2, 5.0, 5.1, or 6.
Use ConsoleOne
source server's file system and the source server itself.
Update the source server with the latest NetWare Support Pack.
Updates are available at the
(http://support.novell.com/csp/csplist.html).
NetWare Migration Wizard 6 does not run on Windows 95
TM
to verify that you have the Supervisor right to the
TM
Consolidated Support Pack Home Page
protocol should be configured on
for
TM