[Nwi:tcpip] Section - Novell NETWARE 6-DOCUMENTATION Manual

Default IPX Frame Typer=<string>

[NWI:TCPIP] Section

Logical Name n = <string>
IP Address n = <decimal number>
62
Other Installation Options
Default (none)
Values (Frame types that are supported by a driver are found in the
driver's LDI file
Key Required No
Example Default IPX Frame Type=Ethernet 802.2
Purpose Identifies the network frame type to be bound to the IPX stack
when the "Single Network Adapter" is set to True.
Default
Values
Key Required
Example
Purpose
Default
Values
Key Required
Example
Purpose
(none)
(name identified in the Network Adapter sections of the
response file)
No, unless IP is to be bound.
Logical Name 1 = 3C59X_1_EII
Identifies the name of the adapter and frame type that the
protocol is to be bound to.
(none)
(valid IP address)
No, unless Logical Name is set
IP Address 1 = 130.1.130.1
Specifies the IP address to be bound.