Internal Options For Launching A Remote Operation; Installing A Remote Management Proxy; Section 2.10, "Installing A Remote Management Proxy - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual

Command Line Option Parameter
encoding encname
compresslevel n
quality n
zenpasswd
locale
proxy proxy_server Specifies the DNS name or the IP address of the remote

2.9.2 Internal Options for Launching a Remote Operation

The following table lists the options that Remote Management uses internally. These options should
not be used when you launch a remote management operation from the command line.
Internal Options for Launching a Remote Operation
Table 2-2
Option Description
zenrights Specifies ZENworks Rights Authentication as the authentication scheme.
pipe Specifies authentication information.

2.10 Installing a Remote Management Proxy

If a managed device is on a private network or is on the other side of a firewall or router that is using
NAT (Network Address Translation), the remote management operation of the device can be routed
through a remote management proxy. The proxy can be installed on a Windows managed device or a
Linux device (Primary Server or Satellite Server). By default, the remote management proxy listens
on port 5750.
Description
Specifies the desired encoding to be used for the session. The
different types of encoding are Raw, CopyRect, RRE, CoRRE,
Hextile, Zlib, and Tight.
Specifies the compression level to compress the remote session
data from 0 to 9. Level 1 uses a minimum of CPU time and
achieves weak compression ratios, and level 9 offers best
compression but is slow in terms of CPU time consumption on the
server side. Use high levels with very slow network connections,
and low levels when working over high-speed LANs. We
recommend that you do not use compression level 0.
Specifies the JPEG quality level from 0 to 9. Quality level 0
denotes poor image quality but very impressive compression
ratios, and level 9 offers very good image quality at lower
compression ratios.
Specifies that the authentication scheme to be used is ZENworks
Password Authentication.
Specifies the locale in which the resources are to be displayed. By
default, English is used. The values for this option are: English,
French, German, Spanish, Portuguese, Japanese, Italian,
Chinese(Simplified), and Chinese(Traditional).
management proxy and the port number in one of the following
formats:
IP address~~Port. For example 10.0.0.0~~5750.
IP address~Port. For example 10.0.0.0~50.
The default port for the proxy is 5750.
Setting Up Remote Management 47