Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 26

Field
Give Audible Beep to
User on Managed Device
Every [ ] Seconds During
Remote View
7 Click Next to display the Remote Diagnostics Settings page. To accept the default settings,
proceed to the next step, or use the information specified in the following table to change the
default settings.
Field
Allow Managed Device to be
Diagnosed Remotely
Ask Permission from User on
Managed Device Before
starting Remote Diagnostics
Give Visible Signal to User
on Managed Device During
Remote Diagnostics
Give Audible Beep to User
on Managed Device Every [ ]
Seconds During Remote
Diagnostics
Allow Managed Device
Screen to be Blanked During
Remote Diagnostics
Display Warning Message
Before Reboot for [ ]
Seconds
Automatically Terminate
Remote Diagnostics Session
After Inactivity of [ ] Minutes
8 Click Next to display the Remote Execute Settings page. To accept the default settings, proceed
to the next step, or use the information specified in the following table to change the default
settings.
26 ZENworks 10 Configuration Management Remote Management Reference
Details
Generates a beep on the managed device during the Remote View
session. The beep is generated periodically after the specified number
of seconds.
Details
Allows Remote Diagnostics sessions on the managed device.
Selecting this option enables the subsequent options on the page.
Deselecting the option disables the Remote Diagnostics operation
on the device.
Ensures that the remote operator requests permission from the user
on the managed device before starting a Remote Diagnostics
session.
Displays a visible signal in the top right corner of the managed
device desktop during the Remote Diagnostics session.The visible
signal lets the user on the managed device know that a Remote
Diagnostics session is in progress.
Generate a beep on the managed device during the Remote
Diagnostics session. The beep is generated periodically after the
specified number of seconds.
Enables blanking of the screen of the managed device during a
Remote Diagnostics session. The managed device keyboard and
mouse are always locked during a Remote Diagnostics session.
Selecting this option also disables the visible signal on the managed
device.
Displays a warning message on the managed device at the start of
the Remote Diagnostics session, reminding the user to save all
existing applications. This warning message is displayed for the
specified duration to prevent the user from losing any unsaved data,
because the remote operator might initiate a system reboot during
the Remote Diagnostics session.
Terminates the Remote Diagnostics session if it is inactive for the
specified duration.