Configuring The Remote Management Settings At The Folder Level; Configuring The Remote Management Settings At The Device Level; Section 2.1.2, "Configuring The Remote Management Settings At The Folder Level; Section 2.1.3, "Configuring The Remote Management Settings At The Device Level - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual

Task
Add an application
Delete an application
Revert to default
applications
8 Click Apply, then click OK.
These changes are effective on the device, when the device is refreshed.
2.1.2 Configuring the Remote Management Settings at the
Folder Level
By default, the Remote Management settings configured at the zone level are applied to all the
managed devices. However, you can modify these settings for the devices within a folder:
1 In ZENworks Control Center, click Devices.
2 Click the folder (details) for which you want to configure the Remote Management settings.
3 Click Settings, then click Device Management > Remote Management.
4 Click Override.
5 Edit the Remote Management settings as required.
6 To apply the changes, click Apply.
or
To revert to the system settings configured at the zone level, click Revert.
7 Click OK.
These changes are effective on the device, when the device is refreshed.
2.1.3 Configuring the Remote Management Settings at the
Device Level
By default, the Remote Management settings configured at the zone level are applied to all the
managed devices. However, you can modify these settings for the managed device:
1 In ZENworks Control Center, click Devices.
2 Click Servers or Workstations to display the list of managed devices.
3 Click the device for which you want to configure the Remote Management settings.
4 Click Settings, then click Device Management > Remote Management.
5 Click Override.
22 ZENworks 10 Configuration Management Remote Management Reference
Details
1. Click Add.
2. Specify the application name and the application path on the
managed device.
3. Click OK.
1. Select the application you want to delete.
2. Click Delete, then click OK.
1. Click Revert, then click OK.