Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 25

Field
Allow Managed Device to be
Controlled Remotely
Ask Permission from User on
Managed Device Before
Starting Remote Control
Give Visible Signal to User on
Managed Device During
Remote Control
Give Audible Beep to User on
Managed Device Every [ ]
Seconds During Remote
Control
Allow Managed Device Screen
to be Blanked During Remote
Control
Allow Managed Device Mouse
and Keyboard to be Locked
During Remote Control
Allow Screen Saver to be
Automatically Unlocked During
Remote Control
Automatically Terminate
Remote Control Session After
Inactivity of [ ] Minutes
6 Click Next to display the Remote View Settings page. To accept the default settings, proceed to
the next step, or use the information specified in the following table to change the default
settings.
Field
Allow Managed Device to
be Viewed Remotely
Ask Permission from
User on Managed Device
Before starting Remote
View
Give Visible Signal to
User on Managed Device
During Remote View
Details
Allows Remote Control sessions on the managed device.
Selecting this option enables the subsequent options on the page.
Deselecting the option disables the Remote Control operation on
the device.
Allows you to request permission from the user on the managed
device before starting a Remote Control session.
Displays a visible signal in the top right corner of the managed
device desktop during the Remote Control session. The visible
signal lets the user on the managed device know that a Remote
Control session is in progress.
Generates a beep on the managed device during a Remote
Control session. The beep is generated periodically after the
specified number of seconds.
Enables blanking of the screen of the managed device during a
Remote Control session. Selecting this option also locks the
keyboard and the mouse controls of the managed device.
Enables locking of the managed device mouse and keyboard
during a Remote Control session.
Enables the unlocking of a password-protected screen saver from
the Remote Control Viewer before the start of a Remote Control
session on the managed device.
Terminates a Remote Control session on the managed device if it
has been inactive for the specified duration.
Details
Allows Remote View sessions on the managed device. Selecting this
option enables the subsequent options on the page. Deselecting the
option disables the Remote View operation on the device.
Allows you to request permission from the user on the managed device
before starting a Remote View session.
Displays a visible signal in the top right corner of the managed device
desktop during the Remote View session.The visible signal lets the user
on the managed device know that a Remote View session is in
progress.
Setting Up Remote Management 25