Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 50

WARNING: Disabling SSL authentication is not recommended because it allows the external
processes to access the network devices without any authentication.
verifyViewerCert: Specifies if the Remote Management Viewer certificates needs to be verified.
This setting is applicable only when SSL authentication is enabled. The possible values are 0 or 1.
The default value is 1, which indicates that the Remote Management Viewer certificates must be
verified When a session is initiated from a stand-alone viewer, the remote operator might not have
the required certificates that are chained to the root Certificate Authority. If this is a case, the proxy
fails to connect to the server.
loggingenabled: Specifies whether the messages should be logged on the device. The possible
values are true or false. The default value is true.
For information on other registry settings, see the
/etc/opt/novell/zenworks/repeater/
file.
nzrepeater.ini
50 ZENworks 10 Configuration Management Remote Management Reference