Enabling The Remote Management Listener; Creating The Remote Management Policy; Section 2.2, "Enabling The Remote Management Listener; Section 2.3, "Creating The Remote Management Policy - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual

6 Edit the Remote Management settings as required.
7 To apply the changes, click Apply.
or
To revert to the previously configured system settings on the device, click Revert.
If the Remote Management settings on the device were configured at the folder level, the
settings revert to the configured folder level settings; otherwise, they revert to the default zone
level settings.
8 Click Ok.
These changes are effective on the device, when the device is refreshed.

2.2 Enabling the Remote Management Listener

To enable a Remote Management Listener to listen for connections from a managed device:
1 In ZENworks Control Center, click Devices.
2 In Device Tasks in the left pane, click Remote Management Listener.
3 In the Remote Management Listener dialog box, specify the port to listen for the remote
connections. By default, the port number is 5550.
4 Click OK.
The ZENworks Remote Management Listener icon appears in the notification area.

2.3 Creating the Remote Management Policy

The Remote Management policy lets you configure the behavior or execution of a Remote
Management session on the managed device. The policy includes settings for Remote Management
operations such as Remote Control, Remote View, Remote Execute, Remote Diagnostics, and File
Transfer, and also allows you to control settings for security.
By default, a secure Remote Management policy is created on the managed device when the
ZENworks Adaptive Agent is deployed with the Remote Management component on the device.
You can use the default policy to remotely manage a device. To override the default policy, you can
explicitly create a Remote Management policy for the device.
1 In ZENworks Control Center, click the Policies tab.
2 In the Policies list, click New, then click Policy to display the Select Policy Type page.
3 Select Remote Management Policy, click Next to display the Define Details page, then fill in
the fields:
Policy Name: Provide a unique name for the policy. The policy name must be different than
the name of any other item (group, folder, and so forth) that resides in the same folder.
Folder: Type the name or browse to the ZENworks Control Center folder where you want the
policy to reside. The default is
your policies.
Description: Provide a short description of the policy's content. This description displays in
the summary page of the policy in ZENworks Control Center.
, but you can create additional folders to organize
/policies
Setting Up Remote Management 23