Managing A Remote View Session - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual

Task
Terminate the Remote Session
Invite an external remote operator
If the master remote operator disconnects the remote session, then all the remote operators are
terminated from the session.

3.2 Managing a Remote View Session

Remote View lets you remotely connect with a managed device so that you can view the managed
device desktop. For information on launching a Remote View session, see
Remote Management Operations," on page
The following table describes the various toolbar options available in the Remote Management
viewer during a Remote View session.
Toolbar Options in the Remote Management Viewer
Table 3-3
Option Shortcut Key
Connection Options Ctrl+Alt+Shift+P
Connection Info Ctrl+Alt+Shift+I
Full Screen Ctrl+Alt+Shift+F
Steps
1. Select the remote operator
you want to terminate from
the Remote Session.
2. Click Terminate.
1. Click Invite External to invite
remote operators not listed
in the Session Collaboration
window to join the remote
session.
2. Specify the DNS name or
the IP address of the remote
operator's device and the
port number. For example,
10.0.0.0 ~~1000.
3. Click Invite.
34.
Functionality
Allows you to configure various session parameters
such as format and encoding for enhancing the session
performance, logging, and local and remote cursor
handling.
Provides the hostname, port, screen resolution, and
protocol version of the managed device.
Allows you to toggle between full screen and normal
mode.
Additional Details
If the selected remote operator is
in Remote Control mode, then
you will regain the Remote
Control rights.
The remote operator's session
terminates and the color of the
circle for the remote operator
changes to gray.
Section 2.8, "Starting
Managing Remote Sessions 55