Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 48

For more information on Remote Management Proxy, see
Management Proxy," on page
For information on the system requirements that a Windows managed device or a Linux device must
meet to enable the proxy to be installed on the device, see
10 Configuration Management Installation
To install the proxy, perform the following steps:
On Windows:
1 On the device, open a Web browser to the ZENworks download page:
https://server/zenworks-setup
where server is the DNS name or IP address of a ZENworks Server.
2 In the left navigation pane, click Administrative Tools.
3 Click
location.
version is the version of the ZENworks product.
4 Install the proxy application by executing the following command:
msiexec /i novell-zenworks-rm-repeater-<version>.msi
TARGETDIR="ZENworks_Installation_directory"
On Linux:
1 On the device, open a Web browser to the ZENworks download page:
https://server/zenworks-setup
where server is the DNS name or IP address of a ZENworks Server.
2 In the left navigation pane, click Administrative Tools.
3 Click
4 Decide whether to immediately install the proxy or save the proxy RPM file to install it later.
To immediately install the proxy, click Open With to open the Remote Management Proxy
with zen-installer, specify the root password, then click OK.
To save the proxy RPM file to the default download directory so that you can install it
later, click Save to Disk. To install the RPM, do one of the following:
The Remote Management Proxy is designed to run automatically upon installation. You can choose
to customize its behavior by modifying the default settings for the device. For more information on
the Remote Management Proxy settings, see
Proxy," on page
48 ZENworks 10 Configuration Management Remote Management Reference
16.
novell-zenworks-rm-repeater-<version>.msi
novell-zenworks-rm-repeater-<version>.noarch.rpm
Click the proxy RPM file, specify the root password, then click OK.
Run the following command as a super user or root user:
rpm -ivh novell-zenworks-rm-repeater-<version>.noarch.rpm
49.
Section 1.4, "Understanding Remote
"System Requirements" in the
Guide.
and save the file to a temporary
.
Section 2.11, "Configuring a Remote Management
ZENworks
.