Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 21

Task
Add a remote management
proxy
Delete a remote
management proxy
7 (Optional) Configure an application to be launched on the managed device during the Remote
Diagnostics session by adding it to the Diagnostics Applications list. By default, the list
includes the following applications:
System Information
Computer Management
Services
Registry Editor
The following table lists the tasks that you can perform to customize the Diagnostics
Applications list:
Details
1. Click Add to display the Add Proxy Settings dialog box.
2. Fill in the following fields:
Proxy: Specify the IP address or DNS name of the remote
management proxy.
IP Address Range: Specify the IP addresses of the devices
you want to remotely manage through the remote management
proxy. You can specify the IP address range in one of the
following ways:
Specify the range of IP addresses using CIDR (Classless
Inter-Domain Routing) notation. With CIDR, the dotted
decimal portion of the IP address is interpreted as a 32-bit
binary number that has been broken into four 8-bit bytes.
The number following the slash (/n) is the prefix length,
which is the number of shared initial bits, counting from the
left side of the address. The /n number can range from 0 to
32, with 8, 16, 24, and 32 being commonly used numbers.
Examples:
123.45.678.12/16: Specifies all IP addresses that start with
123.45.
123.45.678.12/24: Specifies all IP addresses that start with
123.45.678.
Specify the range of IP addresses in the
format. For example:
To IP address
123.45.678.12 - 123.45.678.15: Specifies all IP addresses
in the range 123.45.678.12 to 123.45.678.15.
1. Select the proxy you want to delete.
2. Click Delete, then click OK.
-
From IP address
Setting Up Remote Management 21