Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 27

Field
Allow programs to be
remotely executed on the
managed device
Ask permission from User
on Managed Device Before
Starting Remote Execute
Give Visible Signal to User
on Managed Device During
Remote Execute
Automatically Terminate
Remote Diagnostics
Session After Inactivity of [ ]
Minutes
9 Click Next to display the File Transfer Settings page. To accept the default settings, proceed to
the next step, or use the information specified in the following table to change the default
security settings.
Field
Allow Transferring Files on
Managed Device
Ask permission from User on
Managed Device Before
Starting File Transfer
Give Visible Signal to User on
Managed Device During File
Transfer
Allow Files to be Downloaded
from Managed Device
File Transfer Root Directory
10 Click Next to display the Security Settings page. To accept the default settings, proceed to the
next step, or use the information specified in the following table to change the default security
settings.
Details
Allows programs to be executed remotely on the managed device.
Selecting this option enables the subsequent options on the page.
Deselecting the option disables the Remote Execute operation on
the device.
Ensures that the remote operator requests permission from the user
on the managed device before starting a Remote Execute session.
Displays a visible signal in the top right corner of the managed device
desktop during the Remote Execute session. The visible signal lets
the user on the managed device know that a Remote Execute
session is in progress.
Terminates the Remote Execute session if it is inactive for the
specified duration.
Details
Enables transfer of files between the management console and the
managed device. Selecting this option enables the subsequent
options on the page. Deselecting the option disables the File
Transfer operation on the device
Ensures that the remote operator requests permission from the
user on the managed device before starting a File Transfer
session.
Displays a visible signal in the top right corner of the managed
device desktop during the File Transfer session. The visible signal
lets the user on the managed device know that a File Transfer
session is in progress.
Allows a remote operator to open files on the managed device and
transfer them to the management console. If this option is not
selected, the remote operator can only transfer files from the
management console to the managed device.
Specify the managed device directory to be seen by the remote
operator during a File Transfer session. The remote operator can
only transfer files to and from this directory and its subdirectories.
The default directory is My Computer, which means that the remote
operator can see and transfer files in the entire file system of the
managed device.
Setting Up Remote Management 27