Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 46

Command Line Option Parameter
noemulate3
nojpeg
nocursorshape
noremotecursor
fitwindow
scale
emulate3timeout
disableclipboard
delay
loglevel
console
logfile
config
key
cert
CAcert
46 ZENworks 10 Configuration Management Remote Management Reference
Description
Does not emulate a three-button mouse.
Disables lossy JPEG compression. This is not recommended
because the efficiency of the encoder might reduce. You might
want to use this option if it is absolutely necessary to achieve a
perfect image quality.
Disables the cursor shape updates to handle remote cursor
movements. Using the cursor shape updates decreases the
delays with remote cursor movements, and can improve
bandwidth usage dramatically.
Does not show the remote cursor.
Hides the scroll bar of the viewing window.
percentage Zooms the viewing window to the percentage of scaling specified.
ms Specifies the time-out for emulating a three-button mouse.
Disables the copying of data into the clipboard.
Renders a display area and waits for the specified time before
retrieving the next update.
n Specifies the levels of information logging.
Logs information in a console window.
filename Name of the log file where information is to be logged.
filename Name of the configuration file to be used for loading predefined
configuration settings.
filename Name of the file where private key is stored. This key is used
during an SSL handshake with the managed device.
IMPORTANT: The key and the cert options must be used
together. If you use these options along with the
command, then for security reasons you must disable the Allow
connection when Remote Management Console does not have
SSL certificate option in the security settings of the Remote
Management policy.
filename Name of the file where the certificate corresponding to the private
key is stored.
IMPORTANT: The key and the cert options must be used
together. If you use these options along with the
command, then for security reasons you must disable the Allow
connection when Remote Management Console does not have
SSL certificate option in the security settings of the Remote
Management policy.
filename Name of the file where the root certificate is stored. This certificate
is used to verify the managed device certificate during an SSL
handshake.
nzrViewer
nzrViewer