Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 45

Command Line Option Parameter
remotecontrol
ftponly
remoteexecute
diagnostics appname
filecompressionlevel level
noencrypt
fullscreen
notoolbar
exclusive
8bit
shared
collaborate
noshared
swapmouse
nocursor
dotcursor
smalldotcursor
normalcursor
belldeiconify
emulate3
Description
Launches a Remote Control operation on the managed device.
Launches a File Transfer operation on the managed device.
Launches a Remote Execute operation on the managed device.
Launches a Remote Diagnostics operation on the managed
device. If the appname parameter is specified, then that
application is launched on the managed device.
Provides means of optimizing the file compression process for
better speed or better compression during a file transfer operation.
The compression level can vary from 0 to 9:
0 indicates no compression
1 indicates best speed
9 indicates best compression
If the compression level is not specified, the default compression
level of 6, which is optimized for both speed and compression, is
used.
Launches the remote session in an unencrypted mode.
Launches a remote operation in the full screen mode on the
managed device.
Hides the toolbar of the viewing window.
Launches the remote session in an exclusive mode.
Specifies the color depth to be used to render the session data.
Enables a shared connection, allowing you to share the desktop
with other clients already using it. This option is True by default.
Launches the remote session in a collaborative mode. This option
is not yet supported on Linux.
Enables an unshared connection, which disconnects other
connected clients or refuses your connection, depending on the
server configuration.
Swaps the mouse buttons.
Displays only the managed device mouse pointer. The local
mouse pointer is not displayed.
Displays the local mouse pointer as a dot. This option is true by
default.
Displays the local mouse pointer as a small dot.
Displays the local mouse pointer in the default shape.
Allows the transmission of a bell character, causing a beep at the
viewer. This option also causes a minimized vncviewer to be
maximized when the bell character is received.
Users with a two-button mouse can emulate a middle button by
pressing both buttons at once. This option is True by default
Setting Up Remote Management 45