Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REMOTE MANAGEMENT REFERENCE 10.3 Management Manual page 24

4 Click Next to display the Remote Management General Settings page. To accept the default
settings, proceed to the next step, or use the information specified in the following table to
change the default settings.
Field
Allow User to Request a
Remote Session
Terminate the Remote
Session When Permission Is
Required from a New User
Logging In to the Managed
Device
Display Remote Session Audit
Information to the User on the
Managed Device
Display Remote Management
Properties in the ZENworks
Icon
Edit
Restore default
Add a Remote Listener
Delete a Remote Listener
5 Click Next to display the Remote Control Settings page. To accept the default settings, proceed
to the next step, or use the information specified in the following table to change the default
settings.
24 ZENworks 10 Configuration Management Remote Management Reference
Details
Enables the user on the managed device to request a remote
operator to perform a remote session. The remote operator must
ensure that the Remote Management Listener is running.
Terminates an ongoing remote session when permission is
required from a new user who has logged into a remotely managed
device.
Allows the user on the managed device to view the audit
information for remote sessions from the ZENworks icon.
Allows the user on the managed device to view the properties
associated with the Remote Management policy in the ZENworks
icon.
To edit the message displayed to the user on the managed device
before starting a remote session:
1. Click Edit to display the Edit Message dialog box.
2. Edit the message.
3. Click OK.
To restore the default message:
1. Click Restore default to revert to the default message.
To add a Remote Listener:
1. Click Add.
2. In the Add Remote Listener dialog box, specify the DNS
name or IP address of the management console and the port
number on which the Remote Management Listener will listen
for remote session requests.
3. Click OK.
To delete a Remote Listener:
1. Select the Remote Listener you want to delete.
2. Click Delete.