Stop Snapshot
This command stops a copy-on-write operation.
Syntax
stop snapshot (virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1 ...
virtualDiskNameN])
Parameter
Parameter
virtualDisk
or
virtualDisks
Stop Storage Array Blink
This command turns off the indicator lights on the storage array that were
turned on by the start storageArray blink command.
Syntax
stop storageArray blink
Parameters
None.
306
Script Commands
Description
Name of the virtual disk for which to start the formatting. You
must put brackets ([ ]) around the virtual disk name. If the
virtual disk name has special characters, you must also put
quotation marks (" ") around the virtual disk name.