Start Remote Replication Synchronization; Start Storagearray Blink - Dell PowerVault MD3620f Command Line Interface Manual

Parameters
Parameter
physicalDisk
or
physicalDisks

Start Remote Replication Synchronization

NOTE:
This command valid only with Fibre Channel storage arrays.
This command starts Remote Replication synchronization.
Syntax
start remoteReplication primary
["virtualDiskName"] synchronize
Parameter
Parameter Description
The name of the primary virtual disk for which you want to start
primary
synchronization. Enclose the primary virtual disk name in double
quotation marks (" ") inside square brackets ([ ]).
Start Storage Array Blink
This command identifies a storage array by turning on the indicator LED for
the storage array. Use the stop storageArray blink command to turn off the
indicator LED for the storage array.
Syntax

start storageArray blink

Parameters
None.
302
Script Commands
Description
Identifies the enclosure and slot where the physical disk resides.
Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You
must put brackets ([ ]) around the enclosure ID value and slot
ID value.