Download Storage Array Physical Disk Firmware - Dell PowerVault MD3620f Command Line Interface Manual

Parameter
downgrade
activateNow

Download Storage Array Physical Disk Firmware

This command downloads firmware images to all of the physical disks in the
storage array.
Syntax
download storageArray physicalDiskFirmware file=
"filename"
[file="filename2"... file="filenameN"]
Parameter
Parameter
file
Additional Information
When you run this command, you can download more than one firmware
image file to the physical disks in a storage array. The number of firmware
image files that you can download depends on the storage array. The MD
storage management software returns an error if you try to download more
firmware image files than the storage array can accept.
198
Script Commands
Description
Specifies that you are loading firmware
that is a previous version. The default
value is FALSE. Set downgrade to TRUE
if you want to download an earlier version
of firmware.
Activates the firmware and NVSRAM
images. The default value is TRUE. If you
set activateNow to FALSE, you must use
the activate storageArray firmware
command to activate the firmware and
NVSRAM values at a later time.
Description
File path and name of the file that contains the
firmware. Valid file names must end with a .dlp
extension. You must put quotation marks (" ")
around the file name.