Create Storagearray Securitykey - Dell PowerVault MD3620f Command Line Interface Manual

NOTE:
You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
NOTE:
One technique for naming the snapshot virtual disk and the repository
virtual disk is to add a hyphenated suffix to the original name of the source virtual
disk. The suffix distinguishes between the snapshot virtual disk and the repository
virtual disk. For example, if you have a source virtual disk with a name of
Engineering Data, the snapshot virtual disk can have a name of Engineering Data-
S1, and the repository virtual disk can have a name of Engineering Data-R1.
NOTE:
If you do not choose a name for the either the snapshot virtual disk or
repository virtual disk, the RAID controller modules create a default name using the
source virtual disk name. For example, if the source virtual disk name is aaa and
does not have a snapshot virtual disk, the default snapshot virtual disk name is
aaa – 1. If the source virtual disk already has
the default name is aaa –
virtual disk does not have a repository virtual disk, the default repository virtual disk
name is aaa – R1. If the source virtual disk already has
virtual disks, the default name is aaa – R
Create Storage Array Security Key
This command creates a new security key for a storage array that has Self-
Encrypting Disk (SED) physical disks. This command also sets the security
definitions and sets the state to Security Enabled.
NOTE:
Before you create a storage array security key, you must set the password
for the storage array. Use the setStorageArray command to set the password for
the storage array.
Syntax

create storageArray securityKey

[keyIdentifier=keyIdentifierString] |
passPhrase=passPhraseString |
file=fileName |
commitSecurityKey=(TRUE | FALSE)
n
. If the source virtual disk name is aaa and the source
n .
n
– 1 number of snapshot virtual disks,
n
– 1 number of repository
Script Commands
181