Show Storage Array Lun Mappings; Show Storage Array Negotiation Defaults - Dell PowerVault MD3620f Command Line Interface Manual

Show Storage Array LUN Mappings

This command returns information from the storage array profile about the
storage array LUN mappings. If you run this command with no parameters,
this command returns all LUN mappings.
Syntax
show storageArray lunMappings [host ["hostName"] |
hostgroup ["hostGroupName"]]
Parameters
Parameter
host
hostGroup

Show Storage Array Negotiation Defaults

This statement returns information about connection-level settings that are
subject to initiator-target negotiation.
Syntax
show storageArray iscsiNegotiationDefaults
Parameters
None.
NOTE:
Information returned includes RAID controller module default settings
(settings that are the starting point for negotiation), and the current active settings.
Description
Name of a specific host for which to see the LUN mappings.
You must put quotation marks (" ") and brackets ([ ]) around
the host name. The host name and quotation marks must be
inside the brackets.
Name of a specific host group for which to see the LUN
mappings. You must put quotation marks (" ") and brackets
([ ]) around the host group name.The host group name and
quotation marks must be inside the brackets.
Script Commands
285