Dell PowerVault MD3620f Command Line Interface Manual page 39

Table 2-4. Recurring Syntax Elements
Recurring Syntax
instance-based-repository-spec
count-based-repository-spec
WWID
(continued)
Syntax Value
repositoryRAIDLevel=repository-raid-
level
repositoryPhysicalDisks=(physical disk-
spec-list)
[enclosureLossProtect=boolean]
repositoryDiskGroup=virtual-disk-
group-number
[freeCapacityArea=integer-literal]
Specify repositoryRAIDLevel with
repositoryPhysicalDisks. Do not specify
RAID level or physical disks with a disk
group. Do not set enclosureLossProtect
when specifying a disk group.
NOTE:
For enclosure loss protection to
work, each physical disk in a disk group
must be on a separate enclosure. If you
set enclosureLossProtect=TRUE and have
selected more than one physical disk from
any one enclosure, the storage array
returns an error. If you set
enclosureLossProtect=FALSE, the storage
array performs operations, but the disk
group you create might not have
enclosure loss protection.
NOTE:
To determine if a free capacity
area exists, issue the show diskGroup
command.
repositoryRAIDLevel=repository-raid-
level
repositoryPhysicalDiskCount=integer-
literal
[physicalDiskType=physical disk-type]
[enclosureLossProtect=boolean]
string-literal
For hostPort identifiers this is a 16-digit
hex number without any colon
delimiters.
About the Script Commands
39