User-Defined Parameters - Dell PowerVault MD3620f Command Line Interface Manual

The command in this example creates a new snapshot repository virtual disk
that consists of three physical disks. The three physical disks comprise a new
disk group with a RAID level of 5. This command also takes a snapshot of the
source virtual disk, which starts the copy-on-write operation.
The following example is the script file version of the command:
create snapshotVirtualDisk sourceVirtualDisk=
"Mars_Spirit_4" repositoryRAIDLevel=5
repositoryPhysicalDiskCount=3;

User-Defined Parameters

Parameters for the create snapshotVirtualDisk command enable you to
define the snapshot virtual disk to suit the requirements of your storage array.
Table 4-3 lists the parameters and descriptions of what the parameters do.
Table 4-3. Snapshot Virtual Disk Parameters
Parameter
physicalDiskType
repositoryDiskGroup
freeCapacityArea
72
Using the Snapshot Feature
Description
Specifies the type of physical disk to use for the
snapshot repository virtual disk. The choice is either
Serial Attached SCSI (SAS) or Serial Advanced
Technology Attachment (SATA). This parameter works
only with the count-based repository method of
defining a snapshot virtual disk.
Specifies the disk group in which to build the snapshot
virtual disk. Default builds the snapshot repository
virtual disk in the same disk group as the source
virtual disk.
Specifies the amount of storage space to use for the
snapshot repository virtual disk. Free storage space is
defined in units of bytes, kilobytes, megabytes, or
gigabytes.