Create Diskgroup - Dell PowerVault MD3620f Command Line Interface Manual

Create Disk Group
This command creates either a free-capacity disk group or a disk group with
one virtual disk when you enter a set of assigned physical disks.
Syntax

create diskGroup

physicalDisks=(enclosureID1,slotID1
enclosureID2,slotID2... enclosureIDn,slotIDn)
raidLevel=(0 | 1 | 5 | 6)
userLabel="diskGroupName"
[driveMediaType=(HDD | SSD | unknown | allMedia)
capacity=virtualDiskCapacity
owner=(0 | 1)
cacheReadPrefetch=(TRUE | FALSE)
segmentSize=segmentSizeValue
usageHint=(fileSystem | dataBase | multiMedia)
enclosureLossProtect=(TRUE | FALSE)
securityType=(none | capable | enabled)]
Parameters
Parameter
physicalDisks
raidLevel
userLabel
154
Script Commands
Description
The physical disks that you want to assign to the
disk group that you want to create. Specify the
enclosure ID value and the slot ID value for each
physical disk that you assign to the disk group.
Enclosure ID values are 0 to 99. Slot ID values are 0
to 31. Enclose the enclosure ID values and the slot
ID values in parentheses.
The RAID level of the disk group that contains the
virtual disk. Valid values are 0, 1, 5, or 6.
The alphanumeric identifier (including - and _)
that you want to give the new disk group. Enclose
the disk group identifier in double quotation marks
(" ").