Start Storage Array Iscsi Refresh; Start Virtual Disk Initialization - Dell PowerVault MD3620f Command Line Interface Manual

Start Storage Array iSCSI Refresh

This command initiates a refresh of the network address information for the
iSNS server. If the DHCP server is marginal or unresponsive, the refresh
operation can take from 2 to 3 minutes to complete.
NOTE:
This command is for IPv4 only.
Syntax
start storageArray isnsServerRefresh
Parameter
None.
NOTE:
If you used the set storageArray isnsIPv4ConfigurationMethod command to
set the configuration but did not set the configuration to DHCP, running the start
storageArray isnsServerRefresh returns an error.

Start Virtual Disk Initialization

This command starts the formatting of a virtual disk in a storage array.
NOTE:
Initializing a virtual disk is a long-running operation that you cannot stop.
Syntax
start virtualDisk [virtualDiskName] initialize
Parameter
Parameter
virtualDisk
Description
Name of the virtual disk for which to start the formatting. You
must put brackets ([ ]) around the virtual disk name. If the
virtual disk name has special characters, you must also put
quotation marks (" ") around the virtual disk name.
Script Commands
303