Dell PowerVault MD3620f Command Line Interface Manual page 200

Syntax
enable diskGroup [diskGroupName] security
Parameter
Parameter
diskGroup
Additional Information
To successfully run this command, the following conditions must be met:
All physical disks in the disk group must be self-encrypting disk (SED)
physical disks.
• The Physical Disk Security premium feature must be enabled.
• The storage array security key has to be set.
• The disk group is Optimal, and it does not have snapshot virtual disks or
repository virtual disks.
The RAID controller module firmware creates a lock that restricts access to
the SED physical disks. SED physical disks have a state called Security
Capable. When you create a security key, the state is set to Security Enabled,
which restricts access to all SED physical disks that exist within the storage
array.
200
Script Commands
Description
The alphanumeric identifier (including -
and _) of the disk group that you want to
place in the Security Enabled state.
Enclose the disk group identifier in square
brackets ([ ]).