Create Host - Dell PowerVault MD3620f Command Line Interface Manual

Create Host

This command creates a new host.If you do not specify a host group in which
to create the new host, the new host is created in the default group.
Syntax
create host userLabel="hostName"
[hostGroup=("hostGroupName" | defaultGroup)]
[hostType=(hostTypeIndexLabel |
hostTypeIndexNumber)]
Parameters
Parameter
userLabel
hostGroup
hostType
NOTE:
You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
Description
The name that you want to give the host that you
are creating. Enclose the host name in double
quotation marks (" ").
The name of the host group in which you want to
create a new host. Enclose the host group name in
double quotation marks (" "). (If a host group does
not exist, you can create a new host group by using
the create hostGroup
defaultGroup option is the host group that contains
the host to which the virtual disk is mapped.
The index label or the index number that identifies
the host type. Use the show
hostTypeTable
available host type identifiers. If the host type has
special characters, enclose the host type in double
quotation marks (" ").
command.) The
storageArray
command to generate a list of
Script Commands
159