Show Remote Replication Virtual Disk Synchronization Progress; Show Storagearray - Dell PowerVault MD3620f Command Line Interface Manual

Show Remote Replication Virtual Disk Synchronization Progress

NOTE:
This command valid only with Fibre Channel storage arrays.
This command returns the progress of data synchronization between the
primary virtual disk and the secondary virtual disk in a Remote Replication
configuration. This command shows the progress as a percentage of data
synchronization that has been completed.
Syntax
show remoteReplication (localVirtualDisk
["virtualDiskName"] |
localVirtualDisks ["virtualDiskName1" ...
"virtualDiskNameN"])
Parameter
Parameter
localVirtualDisk or
localVirtualDisks
Show Storage Array
This command returns configuration information about the storage array.
The parameters return lists of values for the components and features in the
storage array. You can enter the command with a single parameter or more
than one parameter. If you enter the command with no parameters, the entire
storage array profile is displayed (which is the same information as if you
entered the profile parameter).
Syntax
show storageArray (autoSupportConfiguration |
profile | batteryAge | connections |
defaultHostType | healthStatus | hostTypeTable |
hotSpareCoverage | features | time |
virtualDiskDistribution | summary)
280
Script Commands
Description
The name of the primary virtual disk of the remote
replication pair for which you want to check
synchronization progress. Enclose the primary
virtual disk name in double quotation marks (" ")
inside square brackets ([ ]).