Diagnose Remotereplication; Disable Storage Array Feature - Dell PowerVault MD3620f Command Line Interface Manual

Diagnose Remote Replication
NOTE:
This command valid only with Fibre Channel storage arrays.
This command tests the connection between the specified primary virtual
disks and the replication virtual disks on a storage array with the Remote
Replication premium feature enabled.
Syntax
diagnose remoteReplication (primary
[primaryVirtualDiskName] |
primaries [primaryVirtualDiskName1 ...
primaryVirtualDiskNameN])
testID=connectivity
Parameters
Parameter
primary or
primaries

Disable Storage Array Feature

This command disables a storage array feature. Run the show
storageArray command to display a list of the feature identifiers for all
enabled features in the storage array.
Syntax
disable storageArray [featurePack |
feature=(storagePartition2 | storagePartition4 |
storagePartition8 | storagePartition16 |
storagePartition32 | storagePartition64 |
storagePartition96 | storagePartition128
|storagePartition256 | storagePartitionMax |
snapshot2 | snapshot4 | snapshot8 | snapshot16 |
remoteReplication8 | remoteReplication16 |
Description
The name of the primary virtual disk of the remote
replication pair to be tested. More than one primary virtual
disk name can be entered. Enclose the primary virtual disk
names in square brackets ([ ]). If the primary virtual disk
name has special characters, the primary virtual disk name
must also be enclosed in double quotation marks (" ").
Script Commands
193