Set Storage Array Icmp Response; Set Storage Array Isns Server Ipv4 Address - Dell PowerVault MD3620f Command Line Interface Manual

Set Storage Array ICMP Response

This command returns the default values for negotiable settings for sessions
and connections, which represent the starting point for the storage array
for negotiations.
Syntax
set storageArray icmpPingResponse=(TRUE | FALSE)
Parameter
Parameter
icmpPingResponse

Set Storage Array iSNS Server IPv4 Address

This command sets the configuration method and address for an IPv4
Internet Storage Name Service (iSNS).
Syntax
set storageArray isnsIPv4ConfigurationMethod=
[static | dhcp]
isnsIPv4Address=ipAddress
Parameter
Parameter
isnsIPv4Address
Description
This parameter turns on or turns off Echo Request
messages. Set the parameter to TRUE to turn on Echo
Request messages. Set the parameter to FALSE to turn
off Echo Request messages.
Description
The IP address that you want to use for the iSNS server.
Use this parameter with the static value for IPv4
configurations. If you choose to have a DHCP server set
the IP address for an IPv4 Internet iSNS server, you must
set the isnsIPv4Address parameter to 0.0.0.0.
Script Commands
257