Dell PowerVault MD3620f Command Line Interface Manual page 33

Powervault modular disk storage arrays
Hide thumbs Also See for PowerVault MD3620f:
Table of Contents

Advertisement

NOTE:
You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
Use an object type when the command is not referencing a specific object.
The all parameter means all objects of the specified type in the storage array
(for example, allVirtualDisks).
To perform a command on a specific object, use brackets to identify the
object (for example, virtualDisk[engineering]). Specify a subset of objects
with a list of identifiers in brackets (for example, virtualDisks[sales
engineering marketing]). In a list of identifiers, use a blank space as the
delimiter. A qualifier is necessary if you want to include additional
information to describe the objects.
Table 2-2 lists the object type and identifiers associated with the object types.
Table 2-2. Object Types and Identifiers
Object Type
controller
physicalDisk
physicalDiskChannel
host
hostChannel
hostGroup
hostPort
snapshot
storageArray
enclosure
virtualDisk
virtualDiskCopy
diskGroup
Identifier
0 or 1
Enclosure ID and the slot ID
Physical disk channel identifier
User label
Host channel identifier
User label
User label
Virtual disk user label
Not applicable
Enclosure ID
Virtual disk user label or the World Wide Identifier
(WWID) for the virtual disk (set command only)
Target virtual disk and, optionally, the source
virtual disk user labels
Virtual disk group number
About the Script Commands
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault md3600f

Table of Contents