Show Virtualdiskcopy Sourcecandidates - Dell PowerVault MD3620f Command Line Interface Manual

Syntax
show virtualDiskCopy (allVirtualDisks |
source ["sourceName"] |
target ["targetName"])
Parameters
Parameter
allVirtualDisks Returns information about virtual disk copy operations for all
source
target
Show Virtual Disk Copy Source Candidates
This command returns information about the candidate virtual disks that you
can use as the source for a virtual disk copy operation.
Syntax

show virtualDiskCopy sourceCandidates

Parameters
None.
Additional Information
This command returns virtual disk copy source information as shown in this
example.
Virtual Disk Name: finance
Capacity: 4.0 GB
Disk Group: 1
290
Script Commands
Description
virtual disk copy pairs.
Name of the source virtual disk about which to retrieve
information. You must put quotation marks (" ") and
brackets ([ ]) around the source virtual disk name. The
source virtual disk name and quotation marks must be inside
the brackets.
Name of the target virtual disk about which to retrieve
information. You must put quotation marks (" ") and
brackets ([ ]) around the target virtual disk name. The target
virtual disk name and quotation marks must be inside the
brackets.