Set Disk Group Forced State - Dell PowerVault MD3620f Command Line Interface Manual

NOTE:
For configurations with more than 32 virtual disks, it is recommended you
quiesce host I/O operations when executing this command.

Set Disk Group Forced State

This command moves a disk group into a Forced state. Use this command if
the start diskGroup import command does not move the disk group to an
Imported state or if the import operation does not work because of hardware
errors. In a Forced state, the disk group can be imported, and you can then
identify the hardware errors.
Syntax
set diskGroup [diskGroupName] forcedState
Parameter
Parameter
diskGroup
NOTE:
You can move the physical disks that comprise a disk group from one
storage array to another storage array. The CLI provides three commands that let
you move the physical disks. The commands are start diskGroup export, start
diskGroup import, and set diskGroup forcedState. In the Forced state, you can
perform an import operation on the disk group.
228
Script Commands
Description
Sequence number of the disk group for which to
set properties. You must put brackets ([ ]) around
the disk group number.