Stop Snapshot Rollback; Start Storage Array Blink; Start Storage Array Iscsi Refresh - Dell PowerVault MD3260 Cli Manual

The repository virtual disk that is associated with the snapshot continues to track any new changes between the base
virtual disk and the snapshot virtual disk that occurs after the rollback operation is completed.
Syntax
start rollback (virtualDisk [snapshotVirtualDiskName]
|
virtualDisks [snapshotVirtualDiskName1 ... snapshotVirtualDiskNameN])
Parameter
Parameter
virtualDisk or
virtualDisks

Stop Snapshot Rollback

This command stops a snapshot rollback operation that was initiated by the start rollback virtual disk command.
NOTE: Canceling a rollback operation leaves the base virtual disk in an indeterminate state with potentially invalid
or inconsistent data. The related snapshot virtual disk becomes disabled and unusable.
Syntax
stop rollback virtualDisk [snapshotVirtualDiskName]
Parameter
Parameter
virtualDisk

Start Storage Array Blink

This command identifies a storage array by turning on the indicator LED for the storage array. Use the stop
storageArray blink command to turn off the indicator LED for the storage array.
Syntax
start storageArray blink
Parameters
None.

Start Storage Array iSCSI Refresh

This command initiates a refresh of the network address information for the iSNS server. If the DHCP server is marginal
or unresponsive, the refresh operation can take from 2 to 3 minutes to complete.
214
Description
Names the specific snapshot virtual disk or snapshot
virtual disks for which you want to start a rollback
operation. Enclose the snapshot virtual disk name in
square brackets ([ ]). If the snapshot virtual disk name has
special characters, you must also enclose the snapshot
virtual disk name in double quotation marks (" ").
Description
Names the specific snapshot virtual disk for which you
want to resume a rollback operation. Enclose the
snapshot virtual disk name in square brackets ([ ]). If the
snapshot virtual disk name has special characters, you
must also enclose the snapshot virtual disk name in
double quotation marks (" ").