Parameter
priority
startingLBA
endingLBA
verbose
NOTE:
The starting logical block address and the ending logical block address are
useful for very large single-virtual disk LUNs. Running a virtual disk consistency
check on a very large single-virtual disk LUN can take a long time. By defining the
beginning address and ending address of the data blocks, you can reduce the time
that a virtual disk consistency check takes to complete.
Clear Physical Disk Port Statistics
This command resets the statistics for all physical disk ports.
Syntax
clear allPhysicalDiskChannels stats
Parameters
None.
Description
Specifies the priority that the consistency check
has relative to host I/O activity. Valid entries are
highest, high, medium, low, or lowest.
The starting logical block address. Use integer
values.
The ending logical block address. Use integer
values.
Captures progress details, such as percent
complete, and shows the information while virtual
disk consistency is being repaired. To capture
progress details, set this parameter to TRUE. To
prevent capturing progress details, set this
parameter to FALSE.
Script Commands
149