Set Physical Disk Hot Spare - Dell PowerVault MD3620f Command Line Interface Manual

Set Physical Disk Hot Spare

This command assigns or unassigns one or more physical disks as a hot spare.
Syntax
set (physicalDisk [enclosureID,slotID] |
physicalDisks [enclosureID1,slotID1 enclosureID2,
slotID2 ... enclosureIDn,slotIDn])
hotSpare=(TRUE | FALSE)
Parameters
Parameter
physicalDisk or
physicalDisks
hotSpare
240
Script Commands
Description
The enclosure and the slot where the physical
disk resides. Enclosure ID values are 0 to 99. Slot
ID values are 0 to 31. Enclose the enclosure ID
values and the slot ID values in square brackets ([
]).
The setting to assign the physical disk as the hot
spare. To assign the physical disk as the hot spare,
set this parameter to TRUE. To remove a hot
spare assignment from a physical disk, set this
parameter to FALSE.