Stop Physicaldisk Blink; Stop Physicaldiskchannel Blink; Stop Physical Disk Channel Fault Isolation Diagnostics - Dell PowerVault MD3620f Command Line Interface Manual

Stop Physical Disk Blink
This command turns off the indicator light on the physical disk that was
turned on by the start physicalDisk blink command.
Syntax

stop physicalDisk blink

Parameters
None.
Stop Physical Disk Channel Blink
This command turns off the indicator lights on the expansion enclosures that
were turned on by the start physicalDiskChannel blink command.
Syntax

stop physicalDiskChannel blink

Parameters
None.

Stop Physical Disk Channel Fault Isolation Diagnostics

This command stops the physical disk port fault isolation diagnostics, which
stops the start physicalDisk channel fault isolation diagnostics command
before it completes.
Syntax
stop physicalDiskChannel faultDiagnostics
Parameters
None.
NOTE:
Use the start physicalDiskChannel faultDiagnostics command and the save
physicalDiskChannel faultDiagnostics command with the stop physicalDiskChannel
faultDiagnostics command. These commands are needed to start the diagnostic
test and save diagnostic test results to a file. You can also stop the start
physicalDiskChannel faultDiagnostics command at any time by pressing <Ctrl><C>.
Script Commands
305