Dell PowerVault MD3620f Command Line Interface Manual page 22

Table 1-2. Command Line Parameters
Parameter
-g
-h
-I
-i
-m
22
About the Command Line Interface
(continued)
Definition
Use to specify an ASCII file that contains e-mail sender
contact information to include in all e-mail alert
notifications. The CLI assumes the ASCII file is text only,
without delimiters or any expected format. A typical file
contains the following information:
• Name
• Title
• Company
• Phone
• Pager
NOTE:
You can use any file name that your operating system
supports. You must not use userdata.txt. Some operating
systems reserve userdata.txt for system information.
Use with the -a and -x parameters to specify the host name
that is running the SNMP agent to which the storage array
is connected.
Use to specify the type of information to be included in
the e-mail alert notifications. The following are valid
information arguments:
• eventOnly — Only event information is included in
the e-mail.
• profile — Event and array profile information is included
in the e-mail.
• supportBundle — Event and support bundle
information is included in the e-mail.
NOTE:
You can enter only one information argument each
time you execute the command. If you want all of the
information, you must run the command three times.
Use with the -d parameter to display the IP address of the
known storage arrays.
Use to specify the host name or IP address of the e-mail
server from which to send e-mail alert notifications.