Show Virtual Disk Action Progress
For a long-running operation that is currently running on a virtual disk, this
command returns information about the virtual disk action and amount of
the long-running operation completed. The completed amount of the long-
running operation is shown as a percentage (for example, 25 means that
25 percent of the long-running operation is completed).
Syntax
show virtualDisk ["virtualDiskName"]
actionProgress
Parameters
Parameter
virtualDisk
Show Virtual Disk Copy
This command returns information about virtual disk copy operations. The
following information is returned:
•
Copy status
•
Start timestamp
•
Completion timestamp
•
Copy priority
•
Source virtual disk WWID or target virtual disk WWID
•
Read-only attribute setting of the target virtual disk
You can retrieve information about a specific virtual disk copy pair or all
virtual disk copy pairs in the storage array.
Description
Name of the virtual disk running the long-running
operation. You must put quotation marks (" ") and
brackets ([ ]) around the virtual disk name. The virtual
disk name and quotation marks must be inside the
brackets.
Script Commands
289