Download Storage Array Firmware/NVSRAM
This command downloads firmware and, optionally, NVSRAM values for the
RAID controller module in the storage array. If you want to download only
NVSRAM values, use the downLoad storageArray NVSRAM command.
Syntax
download storageArray firmware [, NVSRAM ]
file="filename" [, "NVSRAM-filename"]
[downgrade=(TRUE | FALSE)]
[activateNow=(TRUE | FALSE)]
Parameters
Parameter
NVSRAM
file
NVSRAM-filename
Description
Specifies that you want to download a file
with NVSRAM values when you
download a firmware file. You must not
put brackets around this parameter.
Include a comma after the term firmware.
File path and name of the file that contains
the firmware. Valid file names must end
with a .dlp extension. You must put
quotation marks (" ") around the file name.
File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension. You
must put quotation marks (" ") around the
NVSRAM file name. You must include a
comma after the firmware file name.
Script Commands
197