Download Storage Array Nvsram; Enable Disk Group Security - Dell PowerVault MD3620f Command Line Interface Manual

You can schedule downloads for multiple physical disks at the same time,
including multiple physical disks in a redundant disk group. Each firmware
image file contains information about the physical disk types on which the
firmware image runs. The specified firmware images can be downloaded only
to a compatible physical disk. Use the download physicalDisk firmware
command to download a firmware image to a specific physical disk.
The download storageArray physicalDiskFirmware command blocks all I/ O
activity until a download try has been made for each candidate physical disk
or you run the stop storageArray downloadPhysicalDiskFirmware command.
When the download storageArray physicalDiskFirmware command finishes
downloading the firmware image, each candidate physical disk shows the
download status for each physical disk. One of these statuses is returned:
• Successful
• Unsuccessful With Reason
• Never Attempted With Reason

Download Storage Array NVSRAM

This command downloads NVSRAM values for the storage array RAID
controller module.
Syntax
download storageArray NVSRAM file="filename"
Parameter
Parameter
file

Enable Disk Group Security

This command converts a non-secure disk group to a secure disk group.
Description
File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension.
You must put quotation marks (" ")
around the file name.
Script Commands
199