Syslogdipremove - Brocade Communications Systems 8 Command Reference Manual

2

syslogdIpRemove

syslogdIpRemove
Removes a server that is running the syslog daemon.
Synopsis syslogdipremove ip_address
Description Use this command to remove a server that is running the syslogd process and to which system
messages are sent from the syslog server configuration on the switch. IPv6 and IPv4 syslogd
addresses are supported. Use syslogdIPShow to view the current syslog server configuration.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
ip_address
Examples To remove the IP address 1080::8:800:200C:417A from the list of machines to which system
messages are sent:
See Also errShow, syslogdFacility, syslogdIpAdd, syslogdIpShow
948
Specifies the IP address of the server running syslogd.
switch:admin> syslogdipshow
syslog.1
switch:admin> syslogdipremove 1080::8:800:200C:417A
1080::8:800:200C:417A
Fabric OS Command Reference
53-1001764-02