Deleting A Device - Visonic POWERMASTER-10 - INSTALLER GUIDE Manual

A. ZONE
B. TAMPER
C. ALARM
Note: Do not use mains cable other than that supplied by the manufacturer (3 m long).

4.5.4 Deleting a Device

C. To Delete a Device
1.
ADD NEW DEVICES
2.
DELETE DEVICES
3.
CONTACT SENSORS
4.
or
MOTION SENSORS
5.
Z01:Motion Sens
or
6.
Z03:Motion Sens
D-302756
ZONE WIRING
Figure 4.1 - Wiring
Repeat steps 1 to 3 in section 4.5.2 "Adding a Wireless Device".
Select the type of device to be deleted. Select between "CONTACT
SENSORS", "MOTION SENSORS", "SMOKE SENSORS", "WIRED SENSORS",
"KEYFOBS", "SIRENS" and "REPEATERS" for example, "MOTION SENSORS".
Select the motion sensor to be deleted, for example, "Z03:Motion Sens".
A
B
2.2k Ω
2.2k Ω
C
21