Visonic POWERMASTER-10 - INSTALLER GUIDE Manual page 41

C. To Configure Event Types to be Reported to User
8.
VOICE REPORT
9.
1st private tel#
10.
11.
1st PRIVATE TEL. NO.
12.
1st private tel#
13.
2nd private tel#
14.
15.
2nd PRIVATE TEL. NO.
16.
2nd private tel#
17.
3rd private tel#
18.
19.
3rd PRIVATE TEL. NO.
20.
3rd private tel#
21.
4th private tel#
22.
23.
4th PRIVATE TEL. NO.
24.
4th private tel#
25.
Redial attempts
26.
40
You can now press the
" menu, or press the
REPORT
".
EXIT
Enter the first private telephone number (including area code, if required)
of the private subscriber to which the system will report the event groups
defined in Report To Private.
Enter the second private telephone number (including area code, if
required) of the private subscriber to which the system will report the event
groups defined in Report To Private.
Enter the third private telephone number (including area code, if required)
of the private subscriber to which the system will report the event groups
defined in Report To Private.
Enter the fourth private telephone number (including area code, if required)
of the private subscriber to which the system will report the event groups
defined in Report To Private.
Here you determine the number of times the communicator will dial the
called party's number (private telephone).
button to take you to the "
button to take you to "
VOICE
<OK> TO
D-302756