Visonic POWERMASTER-10 - INSTALLER GUIDE Manual page 33

1st RPRT METHOD
2.
disable
3. or
4.
1st RPRT METHOD
5.
2nd RPRT METHOD
6.
disable
7. or
8.
2nd RPRT METHOD
9.
3rd RPRT METHOD
10.
disable
11. or
12.
3rd RPRT METHOD
13.
DUAL REPORTING
14.
disable
15. or
16.
DUAL REPORTING
4.7.3.3 Configuring Account Numbers to be Reported to the Monitoring Station
Continue below from the previous section or repeat steps 1 to 4 of section 4.7.3.1 before continuing with the
following instructions:
32
Here you define the 1st priority of method used to report events.
Select between "disable", "cellular", "broadband" and "PSTN".
Here you define the 2
method defined to report events in the 1st priority fails, the control panel
will attempt to report using the method defined in the 2nd priority.
Select between "disable", "cellular", "broadband" and "PSTN".
Here you define the 3
method defined to report events in the 2
will attempt to report using the method defined in the 3rd priority.
Select between "disable", "cellular", "broadband" and "PSTN".
Here you determine whether to report events using PSTN and cellular at
the same time instead of waiting for the 1
nd
the 2 method.
Select between "disable", "PSTN & broadband", and "PSTN &
cellular".
You can now press the
" menu, or press the
ACCOUNT#
".
EXIT
nd
priority method used to report events. If the
rd
priority method used to report events. If the
nd
priority fails, the control panel
st
method to fail before trying
button to take you to the "
button to take you to "
RCVR 1
<OK> TO
D-302756