Visonic POWERMASTER-10 - INSTALLER GUIDE Manual page 61

a – zone Z:00
33.
disable
or
34.
35.
a - zone
36.
b - zone
37.
b – zone Z:00
38.
disable
or
39.
40.
b - zone
41.
c - zone
42.
c – zone Z:00
43.
disable
or
44.
45.
c - zone
46.
PGM: BY ZONES
47.
PGM: BY LINE FAIL
48.
by line fail NO
or
49.
50.
PGM: BY LINE FAIL
60
Enter the number of the first zone that you designate for activating this
output.
Select between "disable", "turn ON", "turn OFF", "pulse active"
and "toggle".
Enter the number of the second zone that you designate for activating
this output.
Select between "disable", "turn ON", "turn OFF", "pulse active"
and "toggle".
Enter the number of the third zone that you designate for activating this
output.
Select between "disable", "turn ON", "turn OFF", "pulse active"
and "toggle".
Select between "by line fail NO" and "by line failYES".
Pressing the
will take you to "
<OK> TO EXIT
or buttons at any stage in the procedure
".
D-302756