Visonic POWERMASTER-10 - INSTALLER GUIDE Manual page 30

12.
SMS REPORT
13.
disable
14. or
15.
SMS REPORT
16.
GPRS APN
17.
18.
APN NAME
19.
GPRS APN
20.
GPRS USERNAME
21.
22.
APN USERNAME
23.
GPRS USERNAME
24.
GPRS PASSWORD
25.
26.
APN PASSWORD
27.
GPRS PASSWORD
28.
PIN CODE
29.
30.
PIN CODE
31.
PIN CODE
D-302756
Here you determine whether the alarm system will report events to the
Monitoring Station via the SMS Channel.
Select between "disable" and "enable".
Enter the name of the APN Access Point used for the internet settings for
the GPRS (up to 40 digits).
Note: The table at the end of this section provides a list of the keys used
by the PowerMaster-10 editor.
Enter the username of the APN used for GPRS communications (up to
30 digits).
Note: The table at the end of this section provides a list of the keys used
by the PowerMaster-10 editor.
Enter the password of the APN used for GPRS communications (up to 16
digits).
Note: The table at the end of this section provides a list of the keys used
by the PowerMaster-10 editor.
Enter the PIN code of the SIM card installed in the PowerMaster-10 unit
(up to 16 digits).
29