Visonic POWERMASTER-10 - INSTALLER GUIDE Manual page 35

Fully supervised wireless alarm control system
Hide thumbs Also See for POWERMASTER-10 - INSTALLER GUIDE:
Table of Contents

Advertisement

PSTN/GSM RCVR 2
7.
IP RCVR 1
8.
000.000.000.000
9.
IP RCVR 1
10.
IP RCVR 2
11.
000.000.000.000
12.
IP RCVR 2
13.
SMS RCVR1
14.
15.
SMS RCVR1
16.
SMS RCVR2
17.
18.
SMS RCVR2
Compatible Monitoring Station receivers are:
Osborne-Hoffman model 2000, Ademco Model 685, FBII Model CP220, Radionics Model D6500, Sur-
Gard Model SG-MLR2-DG and Silent Knight Model 9500.
IMPORTANT: In telephone number locations and account number locations, you may be required to enter
hexadecimal digits. In telephone number locations, these digits are used as codes to control the dialer:
34
Here you enter the IP address of the IP receiver that is located in the 1
Monitoring Station.
Enter the IP address of the first IP receiver (for further details see the
table at the end of this section).
Here you enter the IP address of the IP receiver that is located in the 2
Monitoring Station.
Enter the IP address of the second IP receiver (for further details see the
table at the end of this section).
Here you enter the telephone number of the SMS receiver that is located
st
in the 1
Monitoring Station.
Enter the telephone number of the first SMS receiver (for further details
see the table at the end of this section).
Here you enter the telephone number of the SMS receiver that is located
nd
in the 2
Monitoring Station.
Enter the telephone number of the second SMS receiver (for further
details see the table at the end of this section).
You can now press the
" menu, or press the
FORMAT
".
EXIT
button to take you to the "
button to take you to "
st
nd
PSTN RPRT
<OK> TO
D-302756

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents