Digital Voice Mode Operation - Icom IC-E92D Instruction Manual

7
DV MODE OPERATION

■ Digital voice mode operation

q Set the desired frequency in B band.
• Select output power, if desired. (p. 24)
w Select DV mode.
(p. 21)
e Set your own call sign for DV operation as follows.
z Enter "MY" in call sign set mode.
➪
❮MENU screen❯
(Push [MENU/ ])
• Pushing and holding [CS](9) for 1 sec. is also available to enter
call sign set mode.
x Rotate [DIAL]
†
programmed several call signs)
call sign and return to CALL SIGN screen.
• See page 34 for your own call sign programming details.
r Set the desired call sign as described in "When calling the
desired station
(p. 39)
t Push and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• Tx/Rx indicator lights red and the RF meter shows the output
power.
38
(pgs. 14, 18)
➪
❮CALL SIGN❯ ❮MY❯
†
(Rotate [DIAL] , then push [ ](5)
to select your own call sign
then push [ ](5) to set the
CALL SIGN CALL SIGN
r UR: UR:
R1: R1:
R2:NOT USE* R2:NOT USE*
MY:MYCALL MY:MYCALL
/IC92 /IC92
" or "When sending a CQ
(p. 39).
y Release [PTT] to return to receive.
• The other station's call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 101 for details.
NOTE: The digital mode operation is vastly different from
‡
.)
FM mode. One of the differences is that in digital mode
the squelch does not function as in FM mode. Chang-
ing the squelch setting will not open it to hear the hiss of
(if you have
"white noise." It only activates for digital squelch functions
such as CSQL
sign squelch)
"
or DSQL
(Digital code squelch)
.
(Digital call