Modular Alarm Platform 5000
Behavior item type
External tamper alarm
Bypass
Disable
Management system interface
trouble
Present mode ON
Blocking time active
Wrong login
User active
External fire alarm
Internal fire alarm
External fire trouble
Internal fire trouble
Walk test
Motion detector test
Exit delay active
Entry delay active
Reportable duress alarm
Reportable hold-up alarm
Reportable amok alarm
Reportable external intrusion
alarm
Reportable external tamper
alarm
Reportable panel summary
trouble
Reportable panel summary
armed
Reportable external fire alarm
Anti-mask intrusion trouble
Bosch Security Systems B.V.
Output is activated for ...
Tamper alarm from armed area
At least one device is bypassed
At least one device is disabled
Trouble in connection to management system
The area programmed as present/absent is disarmed
Blocking time is active for one or more areas
The maximum number of permitted passcode input
attempts on a touch keypad was exceeded
A defined user is logged in at a defined touch keypad
Fire alarm from armed area
Fire alarm from disarmed area
Fire device trouble from armed area
Fire device trouble from disarmed area
Walk test is active
Motion detector test is active in one or more areas
From start of exit delay until
–
end of exit delay
–
arming of the area
From start of entry delay until
–
end of entry delay
–
disarming of the area
Reporting of duress alarm event
Reporting of hold-up alarm event
Reporting of amok alarm event
Reporting of external intrusion alarm event, possibly also
delayed if present/absent option is used
Reporting of external tamper alarm event, possibly also
delayed if present/absent option is used
Reporting of panel summary trouble event, possibly also
delayed if present/absent option is used
Reporting of panel summary armed
Reporting of duress alarm event, possibly also delayed if
present/absent option is used
Covering of a motion detector
Installation manual
Programming | en
2024-10 | V26 | F.01U.168.332
69
Need help?
Do you have a question about the Modular Alarm Platform 5000 and is the answer not in the manual?
Questions and answers