Point Types And Point Evaluation; Output Functions; Programmable Output Signals - Bosch Modular Alarm Platform 5000 Installation Manual

Modular Alarm Platform 5000
Systems in accordance with VdS class C and EN 50131
1.
2.
6.4

Point types and point evaluation

Overview of the standard point types and their pre-set properties
Point Type
Intrusion
Intrusion 24 h
Hold-up*
Amok
Duress
Tamper
Bolt contact
Trouble
Technical
Fire
1
Assignment to Internal Program not possible or with no effect
* If any LSN coupler modules are used and operated in NVK mode, inputs may not be
configured for hold-up alarms.
6.5

Output functions

6.5.1

Programmable output signals

The following functions can be programmed at outputs.
p = programmable
Behavior item type
Hold-up alarm
Amok alarm
Duress alarm
External intrusion alarm
Internal intrusion alarm
Bosch Security Systems B.V.
On systems in accordance with VdS class C and EN 50131, screw the door closed on
the lock side with two sheet-metal screws (3.5 mm x 10 mm) from the accessory pack
in order to guarantee sufficient mechanical strength.
Fix the adhesive seal on the lock.
Arming state
Disarmed
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Internal armed
Yes
1
No
1
No
1
No
1
No
1
No
1
No
1
No
1
No
1
No
Output is activated for ...
Hold-up (silent)
Hold-up (non silent)
Amok alarm (silent)
Amok alarm (non-silent)
Duress alarm
Intrusion alarm from unoccupied protection area
Intrusion alarm from disarmed area with
– activated internal program
– intrusion alarm 24h
Installation manual
Programming | en
Influences ready
to arm status
External armed
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
Yes Yes
Yes No
Yes No
2024-10 | V26 | F.01U.168.332
67